National Plastic Emulsion Paint (666) Powder Pink - 4L
Reference: NPEP666
AED26.00
Tax included
May be available in-store at a lower price
National Plastic Emulsion is recommended as a general purpose and economical decorative finish for interior surfaces like concrete, plaster, blocks, asbestos, masonry, wood etc. it can be applied on stucco filler and gypsum board also for sealing the surfaces.
National Plastic Emulsion is a PVA co-polymer based good quality, economical paint for interior applications. Basically it is a non-washable coating for masonry surfaces, having excellent recoatability. National Plastic Emulsion has very good brushability, with excellent flow and leveling and provides smooth, flat decorative finish. It has good hiding and coverage also. It has good adhesion on various substrates with suitable primer. It contains anti fungal and anti bacterial additives.
NPEP666
10 Items
National Plastic Emulsion is recommended as a general purpose and economical decorative finish for interior surfaces like concrete, plaster, blocks, asbestos, masonry, wood etc. it can be applied on stucco filler and gypsum board also for sealing the surfaces.
Seal strip P-profile-white 6m, for filling empty spaces on doors and windows. Stops the air flow, dust, moist, heat, cold and noise. P profile dimensions: 9x5.5mm.
Steel machine screws with countersunk head. Machine screws are used to clamp machine parts together, either when one of the parts has a threaded hole or in conjunction with a nut.
An adhesive set which consists of high viscosity cyanoacrylate adhesive and activator.
High bonding strength and Suitable for use on vertical surfaces as it will not drip or slump.
It is particularly suited to bonding difficult substrates which have a porous or uneven nature since it increases bonding strength by preventing the adhesive to be absorbed by the surface.
PUTTY FILLER is based on acrylic resin, nitrocellulose and natural wood fiber, it is developed to patch – up uneven surface of the wood and to fill holes and cracks.
Anant block plane is made from accurately machined, fine grey iron. Block plane is ideal for end grain work or any situation where single handed applications are required. The low angle, fully supported, cutter ensures that vibrations is kept to a minimum, thus making for good performance on plastics laminates and other man-made materials. Low angle cutter seats at 13½ degrees. Fully adjustable for depth of cut, cutter alignment and size of mouth.