There are 63 products.
Suitable for sanitary like wash basins, shower cabins, kitchen, toilets, sealing applications
Bonding and repairs a wide variety of joints
Waterproof, good chemical resistance
Good adhesion to a variety of non-porous substrates
Resistant to ultra-violet radiation.
For indoor and outdoor use, High initial tack (50 kg/sq.mtrs)
For all materials and substrates, Weather- and ageing-resistant
Solvent- and isocyanate-free, Over-paintable and sandable
Neutral odour, Low shrinkage
Basis: Silane-curing FlexTec polymer
Coverage: Approx. 300 g/cubic.cm
Final Bond Strength: 1 to 2 N/sq.mm
Gap Bridging Capacity: 10mm
Ideal for crack filling and joints
Smooth out any joint surface within 5min.
Indoor applications
Paintable in 1 hour
No odor
Very low VOC content
For aluminium and other porous substrates
Indoor and outdoor applications
Highest initial tack of Pattex PL range (350KG/m²)
For all absorbent and non-absorbent substrates (incl. mirrors and glass)
Polymer based
Can be applied under water and on wet surfaces
High Initial Tack
For interior and exterior applications
Water-resistant
No need for solvent flashing
Basis: Solvent technology
Coverage: Approx. 300 g/cubic.cm
Final Bond Strength: Up to 6 N/sq.mm
Gap Bridging Capacity: 10mm
Ideal For Windows And Doors, High Yield Properties
Properties, German Quality, Only Best Your Homes
Superior Thermo Insulation Due To Cell Structure (Less Bubbles)
No Sagging Better Vertical Application
GAP Filling properties
Handycoat Gypsum Joint Compound is made from a selected blend of polymers and graded fillers. It has the following properties.
- Easy to sand and fast drying.
- Easy to use.
- Good adhesion.
- Good jointing properties.
- Vapour permeable.
- Environmentally friendly.
Styroskim Putty is a ready to use flexible filler and skim coat for fine leveling of Terraco EIFS basecoat surfaces ( Styrobond DP applied surface). It gives a high quality even surface for painting.
