Plaster Board FR 12.5mm 1200 X 2400mm GKF

Designed for use on multiple surfaces such as smooth or lightly textured walls, trim, baseboards, tile and glass.

Day clean removal leaves behind no damage or sticky residue.

Medium adhesive.

UV and sunlight resistant.

National Plastic Emulsion is recommended as a general purpose and economical decorative finish for interior surfaces like concrete, plaster, blocks, asbestos, masonry, wood etc. it can be applied on stucco filler and gypsum board also for sealing the surfaces.

Hold open facility

Door width-900 to 1300mm

Door opening angle-180 max

Two hydrolic pressure valves control

Two sections of door closing separately, the speed of Locking control by the whole section of the hydrolic pressure

Voltage 230V - 50Hz

Power 100W

Glue Stick Diameter 11.2mm

Gluing Capacity 13 - 18gr / min

Pre-Heat Time 3 - 5 min

Weight 0.6 Kg

Maximum Strength - Our strongest tape delivers a superior, conformable bond on contact Intended for indoor and outdoor use Holds up to 30 lb with 3M industrial strength adhesive To hold 1 lb use 2" To hold 30 lb use 60" Designed For: Painted Drywall, Painted/Finished Wood, Metal, Acrylic, Smooth Stone, and Painted Concrete Easy-to-apply design with no mess or tools Use instead of nails or screws Ensure your surface is smooth, clean and dry for the best bond Great for do-it-yourself projects Color: Black

Can be set in two positions to be used as either a plane or a file. Can be used as either a plane or a file. Fitted with replaceable standard cut blade. Moulded handle. Painted metal body. Polypropylene handle and die cast alloy body for strength and durability. Supplied with a blade for standard work 5-21-293. Uses a 250 mm long blade.

For indoor and outdoor use, High initial tack (50 kg/sq.mtrs)

For all materials and substrates, Weather- and ageing-resistant

Solvent- and isocyanate-free, Over-paintable and sandable

Neutral odour, Low shrinkage

Basis: Silane-curing FlexTec polymer

Coverage: Approx. 300 g/cubic.cm

Final Bond Strength: 1 to 2 N/sq.mm

Gap Bridging Capacity: 10mm

Galvanized iron end plug

The rivet is made of structural steel. It has the function of moving the head to work at an angle of 0 to 360 degrees. It is designed to install aluminum rivets in hard-to-reach places when joining blanks and parts. Length - 263mm Species - rotating Rivet size - 2.4-4.8 Rivet type - rivets Length - 355mm Width - 130mm Height - 28mm

• Quickly reduces the consistency of the lacquer to the required degree.

• Improves film smoothness of lacquers when applied either by spray or dipping thus extending excellent finish.

• Lacquer dries without blushing, resin blush, pin holing and other surface defects.

• No “orange peel” developed after the evaporation of N.C. Thinner, and therefore increases the tensile strength of the film along with its gloss.

National Plastic Emulsion is recommended as a general purpose and economical decorative finish for interior surfaces like concrete, plaster, blocks, asbestos, masonry, wood etc. it can be applied on stucco filler and gypsum board also for sealing the surfaces.

Joint Tape 2" X 90 Yards

Sleek and slim 9mm profile. F type connection.

Clearly printed and angled terminals for ease of installation.

It is designed for cutting PVC, PEX, Plastic Hose, Rubber hoses, Nylon, PV, ABS, PE, PS pipe Body design that provides easy cutting. High pressure resistant aluminum body.

The plier offers the ideal amount of force when tightening our tile leveling wedges into the tile leveling clips.

This one specially designed tool makes it much faster and easier to finish large jobs than doing this motion by hand.

These pinces pliers are yet another job-ready. job-tough tool that has to offer.