Surface Prep & Tape Application

Clean Surface : The surface should be clean, dry and dust-free so the tape sticks properly.

Apply Tape : Lay tape onto the surface, pressing down as you go. Don’t stretch the tape, or it may lift or break.

Secure Tape : Press tape down firmly with a smooth edge, like a putty knife or credit card.

Let Tape Set : Wait about 30 to 60 minutes before you begin painting.

Proper Tape Removal

Wait : Wait until the paint is dry to the touch before removing the tape. Check the paint can for the manufacturer's dry times.

Score : Use a putty knife or razor blade to score along the edge of the tape. This prevents paint from being pulled up with the tape and from cracking along the paint line.

Tape : Taking your time, lift up the painter’s tape and pull it back on itself, removing at a 45 degree angle. If adhesive sticks to the surface, try a 90-degree angle.

Clean Finish : You’ll get a sharp, clean line and a professional looking paint job.

2090-2
50 Items

You might also like

16 other products in the same category:

Product added to compare.