National Spray Plaster Medium is recommended for internal applications to infill the surface imperfections and voids or to render large sections of concrete, brickwork or masonry by spray application. It can be applied as a base coat on location ground floor, basement or any upper deck of car park concrete walls and ceilings. It can be used up to 5mm thickness per coat to fill the voids or to level the surface imperfections. Always recommended as an under coat plaster.
The head of the Sledge Hammer is forged, covered with a special black lacquer, made of 45 steel. The striker has been subjected to a selective hardening, which ensures a special hardness and a rigidity of 52 HRC. The head is slightly convex and polished on both sides. Fiberglass tail with shockproof handle cushions the shocks. The rubber coating prevents slipping and ensures safe handling.
Nylon Polypropylene Tarpaulin Rope.
Nylon rope meeting the needs of most trades and suitable for a variety of applications around the house and workplace.
Strong and UV stabilised, this ropes nylon and porous structure allows it to float and be resistant to acid and alkali chemicals making this rope is perfect for commercial use by large entities as well as households.
Asmaco 2500 is a single component acetic cure silicone sealant which vulcanizes on exposure to moisture in the air at room temperature, to produce a flexible elastomeric sealant.
National Plastic Emulsion is recommended as a general purpose and economical decorative finish for interior surfaces like concrete, plaster, blocks, asbestos, masonry, wood etc. it can be applied on stucco filler and gypsum board also for sealing the surfaces.
Ergonomic design, Durable clip, Test range of 100-500V, Transparent material handle for better visibility for lighting.
Sheathed chrome vanadium steel blade for safety and long product life.
Insulating plastic handle for complete safety.
Tester screwdriver.
Durable clip tilted angle, help user easily hang clip on the pocket.
Test range of 100-500V MAX*
Designed for cutting ceramic tiles up to 14 mm thick and 300 mm long. up to 600 mm. (depending on the model). The cutting element is a VK-8 hard alloy roller. The guides are made of high quality steel with anti-corrosion coating. Cod models. 87622, ??87625 are equipped with a metal square to adjust the size and additional fixing of the cut piece.
Hexagonal shank fits most handheld and stationary drills. Coated by titanium, this drill bit performs well in heat, corrosion and rust resistance. Precision ground 90 degree tip for countersinking most machinable metals like aluminum, woods, rubber and plastic.