Aluminium 10mm Tower Bolt 4" - White

Type of order : Toggle

Neutral position : without neutral

Number of poles : 4 P

Type of pole : 4 P

Frequency : 50/60 Hz

Rated operational voltage Ue : 415 V

Closing ability with 400V in AC23A : 1332 A

Rated short-circuit making capacity Icm under 415V AC according IEC 60947-3 : 1332 A

Thermal rated current outside of housings : 63 A

Power

Power loss per pole at In : 3,5 W

Total power loss under IN : 13,9 W

Chrome molybdenum vanadium.

High tensile, Strength and Long life.

Save cutting load.

Brand: Terminator

Model: TVGA MM-5M

Description: VGA Cable M~M 5M

Longer jaws grip better, thinner jaws give greater access in tight spaces. Precision-machined slide jaw and worm gear allow for exact fastener fit and smooth adjustment. It also works well to secure back nut or bolt while tightening or loosening front nut or bolt with a socket or combination wrench. Greater jaw capacity supports larger nuts and bolts.

Use in supporting horizontal piping away from the wall or floor. Permits installation before or after the pipe is in place. Provides economical installation. Permits use of universally adaptable parts.

Used in many decorative installations, such as door frame moulding or architraves. Simply the basic raw mild steel material, without any coating or finish. Help to reduce timber deformation. Head virtually disappears when punched below the timber surface.

Secure blade grip Interlocking nose tightly holds knife edge in place

Ideally used to support platform trolley and installed in other hand trucks.

It is intended for work with a brick, a stone, concrete. The core is made of 65 Mn alloy steel. The hardness of the working part is 5259 HRc.

25pcs pack. The fisher expansion plug is the first choice when fixing, for example, lighting, lasts, bath and toilet installations and light wall cabinets in concrete and aerated concrete, but also in masonry made from solid or hollow building materials.

As an alkali resistant penetrating primer for interior/exterior surfaces such as cement plasters, concrete and brick works

The drill is made of carbon steel. Hardness of cutting edges 4554 HR?. It can be used with manual mechanical and electrical drills, as well as drilling machines. It is sharp on the side. The hexagonal tail prevents the drill from rotating in the chuck. This drill is intended for obtaining holes in softwood and hardwood with any type of fiber surface, glued plywood, chipboard.

An easy and quick spray and minimal loss.

Fast drying and bright, smooth, durable finish for all interior/exterior applications.

Steel machine screws with countersunk head. Machine screws are used to clamp machine parts together, either when one of the parts has a threaded hole or in conjunction with a nut.

Noise Reduction.

Ergonomics.

Surface Protection.

Better Towing Capabilities.

Long life.

2 Operation Modes: Hammering with rotation & Rotation only Reverse function on brush holder Large trigger switch. Continuous rating Input : 800W No load speed : 0 - 1,200 Vibration Level : Hammer drilling: 15.5m/s² / Drilling: 2.5m/s² Sound Pressure Level : 91dB(A)