The product can be applied by :
Spatula, Trowel (Made of stainless steel).
Conditions during application :
The temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air, measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper drying.
Drying times :
Drying times are generally related to air circulation, temperature, film thickness and number of coats, and will be affected correspondingly.
1.Recommended data given is, for recoating with the same generic type of paint.
2. In case of multi-coat application, drying times will be influenced by the number and sequence and by the total thickness of previous coats applied.
3.The surface should be dry and free from any contamination prior to application of the subsequent coat.
The drying time is measured by stated values:
Relative Humidity (RH) 50 %
| Substrate temperature |
10 °C |
23 °C |
|
| Surface (touch) dry |
12h |
3h |
1h |
| Hard dry |
24h |
5h |
3h |
| Dry to overcoat, minimum |
24h |
5h |
3h |
Substrate :
Cement plaster, Concrete, block work, gypsum board, rendered surfaces, MDF, plywood etc. Substrate should have sufficient strength to receive the paint. Any defects in the substrate like surface undulations, cracks, pin holes etc., should be rectified/filled before starting painting.
Directions for use :
Surface preparation
The substrate must be sound, clean, dry and free from dust, oil, grease, laitance etc. All traces of form release
agents/curing agents must be removed. A light sanding with suitable abrasive material is recommended before
application. Any resulting dust/loose particles must be removed.
Primer
Fenomastic Emulsion Primer : 1 Coat
